| MECHA NUT |  |
| Available in W3/8, M6,M8 Bolt Features Easy installation and no special tool required Nut provides a large bearing surface For sheet metal or block from10 to 60mm in thickness with W3/8, M6 (from 10 to 100mm with M8) |
| MECHA NUT | |
| Available in W3/8, M6,M8 Bolt Features Easy installation and no special tool required Nut provides a large bearing surface For sheet metal or block from10 to 60mm in thickness with W3/8, M6 (from 10 to 100mm with M8) |
Installation Step
 |
 |
 |
 |
 |
| Drill a pre-hole. | Insert MECHA NUT with its nut partbeing folded. | Pushing pusher forward and pull guide toward you. | Cut unnecessary part of guide with a nipper. | Install object with a bolt. |
| Material: Stainless Steel AISI 303 (M6) Stainless Steel AISI 304 (M8) Carbon Steel (M8, W3/8) |
 |
| Bolt Size | Pre-hole Diameter | Length 1 |
Length 2 |
Length of Nut L |
Width of Nut W1 |
Width of Nut W2 |
Max Tension Load KN (lb) |
| M6 | 12mm(15/32") | 82mm | 106mm | 19mm | 10.9mm | 8.8mm | 3.92 (881lb) |
| M8 | 14mm(35/64") | 120mm | 159mm | 32mm | 13.6mm | 12mm | 7.84 (1,762lb) |
| W3/8 | 14mm(35/64") | 80mm | 110mm | 27mm | 13.6mm | 12mm | 7.84 (1,762lb) |
Warning
Max tension load listed is for reference
only.
These values may vary depending on the material
of sheet.
Please drill a proper pre-hole.
